Show or Hide

Water Safety & Flow Control


Float & Thermostatic Steam Trap Cover Assemblies & Repair Kits


1 1/2 to 2 in. (40 to 50mm)


Series WFTC Float & Thermostatic Steam Trap Cover Assemblies & Repair Kits are designed for use on Watts and select Spirax-Sarco F&T steam traps. The WFTC is used with large traps that have piping connections into the cover plate. To avoid "breaking" of piping connections, these kits are installed by removing the trap body. Each kit contains the thermostatic air vent, float, linkage, valve, seat and body gasket. These kits were designed to assure ease of installation.

Loading Models/UPC Codes...
Loading Approvals...
Loading warranty information...
Loading data...

Disclaimer: Watts product dimensions in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

Please Note: Watts literature requires Adobe Acrobat Reader to view.

Got Feedback?