SWC
Discontinued - Replaced By: LFSWS
Stop and Waste Valves
Series SWC, SWT, SWS Stop and Waste Valves are used in residential applications as stop and waste shutoffs. It consists of a brass body construction with a handwheel for shutoff. Series SWC, SWT, SWS comes with a drain cock to allow draining or venting of downstream line when valve is in the off position. Model SWC is available in 1/2, 3/4 in. (15, 20mm) with compression end connections. Model SWT is available in 1/2, 3/4 in. (15, 20mm) with NPT female threaded connections. Model SWS is available in 3/8, 1/2, 3/4 in. (10, 15, 20mm) with solder end connections. Maximum Working Pressure:150psi (10.3 bar) WOG.
Literature
Select a Model
Select options below to identify the UPC, Order Code, and Repair Kit for a specific SWC
No results found
Approval/Certification Information
For product-specific approval information, please refer to the product’s specification sheet (see literature section above) or ask a Watts representative. For general information regarding any approval certification partners identified in the specification sheet, please visit our certification partners’ websites:
ASSE | CSA | FM Approvals | NSF |
UL | ULC | USC | WQA |