100DT-A60
Discontinued
Drain Tubes for Top Mounted T&P Relief Valves
Series 100DT-A60 Drain Tubes for T&P Relief Valves are used on gas, electric, or oil fired residential water heaters to safely drain water discharged from the heater's temperature and pressure relief valve. It connects to the drain connection on a top-mounted relief valve that has up to 105,000 BTU/hr. rating, and has a drop length of 60 in. Model 100DT-A60-12 is for use with center top-mounted relief valve. Series 100DT-A60 hand tightens to relief valve outlet, requiring no special tools or fittings. UPC and IAPMO listed, ASME A112.4.1 approved. Meets Department of Housing and Urban Development requirements. Maximum Working Pressure: 15psi (103 kPa).
Literature
Select a Model
Select options below to identify the UPC, Order Code, and Repair Kit for a specific 100DT-A60
No results found
Approval/Certification Information
For product-specific approval information, please refer to the product’s specification sheet (see literature section above) or ask a Watts representative. For general information regarding any approval certification partners identified in the specification sheet, please visit our certification partners’ websites:
| ASSE | CSA | FM Approvals | NSF |
| UL | ULC | USC | WQA |